Meclift Forklifts Finland: Models, Capacity and Support

· 5 min read

Forklift operating in Urk harbor, Flevoland with ships in the background, urban scenery — business
Photo by Haberdoedas Photography on Pexels

Meclift forklifts in Finland are made by Mecalift Oy, which lists sales, spare-parts and after-sales contacts in Tampere. The ML1812R, ML4212RC and ML4218RC offer different load-center ratings, reach and container-handling capabilities; check the precise model, configuration and site clearances with Meclift before ordering. The manufacturer also offers maintenance agreements and operator training.

Where can I buy or request a quote for a Meclift forklift in Finland?

You can request a quote directly from Mecalift Oy in Tampere. Its contact page lists sales contact Janne Kalliomäki at [email protected] and +358 400 403 593, as well as the address Hammareninkatu 7, FI-33100 Tampere. Finland is listed as a market served directly by the manufacturer.

Make the first enquiry specific. State the load’s weight and dimensions, how far it must be reached, lift height, container or worksite constraints, and the attachments under consideration. Ask the sales team to confirm the exact model and configuration in the written offer. This matters particularly for the ML4218RC: the product page is served under an older ML5012R URL, while its displayed product and specifications refer to the ML4218RC.

A current Finnish price is not published in the supplied materials. A 2022 offer document from German representative Hinrichs lists a base ML1812 at €295,000 excluding VAT and transport, with a stated delivery time of 4–6 months. Treat that figure as historical context only, not a current quote; the document also lists separate prices for options and attachments, showing why the requested configuration affects the total.

Forklift operating in Urk harbor, Flevoland with ships in the background, urban scenery — business
Photo by Haberdoedas Photography on Pexels

Which Meclift forklift models are available, and what are their lifting capacities?

The listed models differ in rated capacity at the stated load center, reach and lift height. Compare those figures against the actual load and working position, rather than choosing by headline capacity alone.

ModelWho it may suitPublished capacity, reach and liftCostKey limitation or check
ML1812RContainer and industrial handling where the truck must work inside a shipping container18,000 kg at 1,200 mm load center; 2,500 mm reach; 6,000 mm standard liftCurrent Finnish price not publishedConfirm container opening and truck configuration; listed minimum height is 2,265 mm
ML4212RCHeavy loads requiring greater reach, including container and long-material handling42,000 kg at 1,200 mm load center; 3,250 mm reach; 7,800 mm liftNot publishedCapacity depends on the load position; the product page describes 13-tonne reach to the end of a standard 20-foot container
ML4218RCHeavy loads positioned deeper in a container or handled with a larger load center42,000 kg at 1,800 mm load center; 3,250 mm reach; 7,800 mm liftNot publishedConfirm the model and current specification with Meclift; its page URL carries the older ML5012R name

According to Meclift’s ML1812R specifications, the machine is rated at 18,000 kg at a 1,200 mm load center and has 2,500 mm reach. Meclift says it can lift empty 20-foot containers from fork pockets and stack them up to three high; with a side spreader, it can handle 40-foot containers.

The ML4212RC product information gives a rating of 42,000 kg at a 1,200 mm load center, with 3,250 mm reach. The displayed ML4218RC information gives the same rated capacity at a 1,800 mm load center. These ratings describe different load centers, so ask Meclift to confirm suitability against the intended load dimensions and handling position.

Can a Meclift ML1812R drive inside a shipping container?

Yes. Meclift says the ML1812R can drive inside shipping containers, and lists a minimum height of 2,265 mm. Before confirming fit, compare that figure and the truck’s specific configuration with the actual container opening and working conditions.

Container work also depends on what the truck must do once inside. Meclift describes the ML1812R as able to lift empty 20-foot containers from fork pockets and stack them up to three high; it says a side spreader enables handling of 40-foot containers. The ML4212RC has a different use case: Meclift says it can reach to the end of a standard 20-foot container while lifting 13 tonnes, and describes bogey rollers for moving loads up to 30 tonnes into the middle of one.

For the ML4218RC, Meclift says the truck can lift 33 tonnes to the middle of a standard container and handle laden 20–40-foot containers with a fork-mounted top-lift spreader. These are manufacturer-described capabilities, not a substitute for checking the exact load, attachment and configuration with the sales team.

Attachments can change the practical fit for a job. Meclift lists coil rams and clamps, lifting beams, double forks, paper clamps, bogey rollers and air-cargo pallet forks for the ML1812R; the other model pages also describe options for heavy, long or containerized loads. Give the sales team the load type and task sequence so the offer addresses both truck and attachment.

After purchase, Meclift recommends following the machine’s periodic maintenance schedule and says it offers service agreements for timely maintenance over the machine’s life cycle. Its Finland contacts page lists Kalle Kurki for after-sales and maintenance at [email protected], +358 40 547 2816, and Mervi Kruger for spare parts at [email protected], +358 50 329 8756. The company also offers tailored training for operators and maintenance personnel at its Finland site or at the customer’s location; a typical course lasts 2–3 days and covers operation, safety, service and maintenance.

Frequently Asked Questions

How much does a Meclift forklift cost?

A current Finnish price is not published in the supplied sources, so request a quote from Mecalift Oy. A German representative’s 2022 offer document listed a base ML1812 at €295,000 excluding VAT and transport; it is historical and not a current Finnish price.

Where can I get Meclift maintenance and spare parts in Finland?

Mecalift Oy lists after-sales and maintenance contact Kalle Kurki and spare-parts contact Mervi Kruger at its Tampere office. The company recommends following the machine’s periodic maintenance schedule and says it offers service agreements.

What types of loads and attachments can Meclift forklifts handle?

Listed applications and attachments include coil handling, paper-roll clamps, lifting beams for long materials, double forks, bogey rollers and air-cargo pallet forks. The appropriate attachment depends on the load and handling task, so include those details in the quote request.

Sources

Written and reviewed by the Money Save Search Editorial Team. Learn how we create content.